3.
Select "R" range of shift lever and monitor "LR SOLENOID DUTY" is 0%
1)
Specification : LR SOLENOID DUTY 0.0 %
After a repair, it may be necessary to check that fault is properly rectified.
After connecting a Scantool, Clear DTC
Start the engine , Install Scantool and select LR, UD, 2ND, OD SOLENOID DUTY service data
Select "R" range of shift lever and monitor "LR SOLENOID DUTY" is 0%
Specification : LR SOLENOID DUTY 0.0 %
Monitoring for (pending) DTC. Is DTC P0750 set?
YES
Go to the applicable troubleshooting procedure.
NO
System OK
