2.
Drive vehicle and Compare data with under the table.
- Start a vehicle ,Verify terminated diagnosis of parts ,which is fixed properly.
- Remove all displayed DTC and then check for trouble code again
After connecting Scantool and Monitor the " ENGINE SPEED,INPUT SPEED SENSOR, DAMPER CLUTCH SOL DUTY and DAMPER CLUTCH SLIP " parameter on the Scantool data list.
Drive vehicle and Compare data with under the table.
- Start a vehicle ,Verify terminated diagnosis of parts ,which is fixed properly.
- Remove all displayed DTC and then check for trouble code again
Monitoring for (pending) DTC. Is DTC P0741 set?
YES
Go to the applicable troubleshooting procedure.
NO
System OK
