2.
After connecting Scantool and monitor the "INPUT SPEED SENSOR " parameter on the Scantool data list.
1)
Test Condition : Engine "ON"
2)
Specification : Gradually rises
After a repair, it may be necessary to check that fault is properly rectified.
After lifting a car and Driving a speed of over 30 Km/h
After connecting Scantool and monitor the "INPUT SPEED SENSOR " parameter on the Scantool data list.
Test Condition : Engine "ON"
Specification : Gradually rises
Monitoring for (pending) DTC. Is DTC P0715 set?
YES
Go to the applicable troubleshooting procedure.
NO
System OK
