3.
Do stall test of the D3 range
- By driving the vehicle, confirm the completion of diagnosis to troubled part’s repair
- Check if DTC is indicated again.
- In troubled case, check if the warning lamp is "ON" when starting more than once
STALL TEST
Start the engine and warming up properly
After connecting Scantool and monitor the "ENGINE SPEED, INPUT SPEED SENSOR, OUTPUT SPEED SENSOR, GEAR POSITION "parameter on the Scantool data list.
Do stall test of the D3 range
Monitoring for (pending) DTC. Is DTC P0733 set?
YES
Go to the applicable troubleshooting procedure.
NO
System OK
