Component Location
General Description

Based on information from various sensors, the PCM measures the fuel injection amount. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by length of time the fuel injector is held open. The PCM controls each injector by grounding the control circuit. When the PCM energizes the injector by grounding the control circuit, the circuit voltage should be low (theoretically 0V) and the fuel is injected. When the PCM de-energizes the injector by opening control circuit, the fuel injector is closed and circuit voltage should momentarily peak

DTC Description

If the surge voltage of cylinder 3 is lower than the threshold value, the PCM determines that a fault exists and a DTC is stored.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

● Surge voltage(Vinj) at injector drive is monitored.

● Poor connection

● Open or short in injector circuit

● Faulty Injector

● Faulty PCM

Enable Conditions

● Engine speed < 1000rpm

● TPS voltage < 1.16V

Threshold value

● Surge voltage(Vinj) < Battery voltage+2V

Diagnosis Time

● continuous

Specification

INJECTOR

Normal Parameter at 20℃ (68℉)

Resistance (Ω)

13 ~ 16 Ω

Schematic Diagram
Яндекс.Метрика