Verification of Vehicle Repair
Verification Procedure
C001 Booster voltage - Too Low
1.

Erase the DTC

2.

Wait 3 seconds and check the DTC

3.

IS THERE DTC P1645/C001 ?

YES

a.

Go to step 4

NO

a.

Intermittent failure, system is O.K at this time.

b.

Go to step 4

4.

Erase the DTC and turn the ignition switch OFF.

5.

Start the engine and check the DTC

6.

IS THERE DTC P1645/C001 ?

YES

a.

Replace a known - good ECM if DTC is memorized.

NO

a.

System OK

note

Internal fault. There is no inspection of service possible for this diagnostic trouble code. Erase the fault memory and perform test drive. If the fault cannot be cancelled, temporarily install a good ECM and If problem is corrected, replace the ECM.

C002 Booster voltage - Too High
7.

Erase the DTC

8.

Wait 3 seconds and check the DTC

9.

IS THERE DTC P1645/C002 ?

YES

a.

Go to step 4

NO

a.

Intermittent failure, system is O.K at this time.

b.

Go to step 4

10.

Erase the DTC and turn the ignition switch OFF.

11.

Start the engine and check the DTC

12.

IS THERE DTC P1645/C002 ?

YES

a.

Replace a known - good ECM if DTC is memorized.

NO

a.

System is O.K

note

Internal fault. There is no inspection of service possible for this diagnostic trouble code. Erase the fault memory and perform test drive. If the fault cannot be cancelled, temporarily install a good ECM and If problem is corrected, replace the ECM.

Яндекс.Метрика