Monitor Scantool Data
1.

Connect scantool to Data Link Cable (DLC)

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "THROTTLE FLAP ACTUATOR" parameter on scantool.

1)

Specification : ON at throttle flap closed

OFF at throttle flap opened

※ Checking throttle flap data change is difficult because when turning engine OFF, communication with scantool terminates.

Observing that intake is closed and reopend for 1 sec. by throttle flap valve is the most clear way of checking operation.

Яндекс.Метрика