4.
Monitor "Clutch switch(M/T)" parameter on the scantool.
1)
Specification : When clutch switch is deactivated : clutch switch(M/T) : OFF
When clutch switch is activated : clutch switch(M/T) : ON
Connect scantool to Data Link Cable (DLC)
Warm engine up to normal operating temperature.
Turn "OFF" electrical devices and A/C.
Monitor "Clutch switch(M/T)" parameter on the scantool.
Specification : When clutch switch is deactivated : clutch switch(M/T) : OFF
When clutch switch is activated : clutch switch(M/T) : ON
