* MT vehicle Only
Possible DTC: P0704
* CC-CODE
C004 (Plausibility error)
Without changing of clutch signal, if vehicle speed is above the set value , error is detected.
Possible causes of trouble :
Open circuit in wiring , Short circuit Fuse defective Poor connection Switch defective |
Measure the voltage at switch pin (ECU side) to GND with ignition on.
Set value : 8 ~ 15V
Check wiring if set value is not attained.
Ignition off
Measure the resistance of switch at the detached plug.
Set value : ---- > 1 MΩ
Depress the clutch pedal.
Set value : 0 ~ 1 Ω
Check wiring between switch and ECU pin 61.
Clutch disengage
Clutch engage // Signal on