note
1.
Coat the inner surface of the bushings with the specified grease.
Specified grease :
Chassis grease SAE J310, NLGI No. 0
2.
Before inserting the clevis pin, apply the specified grease to the clevis pin and washer.
Remove the lower crash pad assembly.
Remove the stop lamp switch connector and disconnect the shift lock cable (Vehicle equipped with cruise control system only).
Remove the cotter pin and clevis pin.
Remove the brake pedal member assembly mounting nut.
Remove the brake pedal assembly.
Coat the inner surface of the bushings with the specified grease.
Specified grease :
Chassis grease SAE J310, NLGI No. 0
Before inserting the clevis pin, apply the specified grease to the clevis pin and washer.
Check the bushing for wear.
Check the brake pedal for bending or twisting.
Check the brake pedal return spring for damage.
Check all parts for crack and wear.
Remove the lower crash pad assembly.
Remove the stop lamp switch connector and disconnect the shift lock cable (Vehicle equipped with cruise control system only).
Remove the cotter pin and clevis pin.
Remove the brake pedal member assembly mounting nut.
Remove the brake pedal assembly.
Coat the inner surface of the bushings with the specified grease.
Specified grease :
Chassis grease SAE J310, NLGI No. 0
Before inserting the clevis pin, apply the specified grease to the clevis pin and washer.
Check the bushing for wear.
Check the brake pedal for bending or twisting.
Check the brake pedal return spring for damage.
Check all parts for crack and wear.
