3.
Using a screwdriver or remover, remove the delta garnish (A).
When removing and installing the fender, an assistant is necessary.
Be careful not to damage the fender and body.
When removing the clips, use a clip remover.
Remove the front bumper cover.
(Refer to the BD group – “Front Bumper”)
Remove the head lamps.
(Refer to the BE group – “Head Lamps”)
Using a screwdriver or remover, remove the delta garnish (A).
Remove the turn signal lamp (A).
Disconnect the turn signal lamp connector (B).
After loosening the mounting bolts and screws, then remove the fender assembly (A).
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damage clips.
