DTC | B1101 Battery voltage too high B1102 Battery voltage too low |
Preparation
Disconnect the negative (-) terminal cable from the battery, and wait at least 30 seconds.
Remove the DAB module.
Disconnect the connectors of the PAB, left and right side airbags, belt pretensioners and satellite sensors.
Disconnect the SRSCM connector.
Place the DAB with the front surface facing upward.
Check source voltage.
Connect the negative (-) terminal cable to the battery.
Turn the ignition switch ON.
LIMIT : 10-16V
Does the SRS warning light turn off ?
Turn the ignition switch to LOCK.
Connect the DAB module.
Connect the PAB connector, left and right side airbag, belt pretensioner and satellite connectors.
Connect the SRSCM connector.
Turn the ignition switch ON.
