1.
Disconnect the negative battery cable and keep secure from battery.
caution
Wait at least 30 seconds after disconnecting the battery cable before doing any further work.
Disconnect the negative battery cable and keep secure from battery.
Wait at least 30 seconds after disconnecting the battery cable before doing any further work.
Remove the center console mounting bolts (10mm).
Remove the center console.
Disconnect the SRSCM connector.
Remove the SRSCM (10mm).
Do not damage the SRSCM terminals or connectors.
Do not disassemble the SRSCM ; It has no serviceable parts.
Store the SRSCM in a clean, dry area.
Do not use any SRSCM which has been subjected to water or shows sign of being dropped or impro perly handled, such as dents, cracks or deformation.
After installing the SRSCM, confirm proper system operation : Turn the ignition switch ON ; the SRS indicatior light should come on for about six seconds and then go off.
