4.
Installation is the reverse order of removal.
Remove the ignition fuse (Fusible link-F).
Disconnect the lead wire.
Remove the ignition coil mounting bolt and remove the ignition coil assembly.
Installation is the reverse order of removal.
Measure the primary coil resistance between terminals 1 and 2.
Measure the secondary coil resistance between the high-voltage terminal for the No.1 and No.4 cylinders, and between the high-voltage terminals for the No.2 and No.3 cylinders.
: 13.0Ω ± 15%
Be sure, when measuring the resistance of the secondary coil, to disconnect the connector of the ignition coil.
