Place the steering columshaft in position and install the 4 mounting bolts temporarily.

Install the bolt on the universal joint and gear box connecting part in the driver's side brake pedal lower portion.

Completely tighten the temporarily installed 4 mounting bolt on the steering column shaft.

After installing the lower crash pad, tighten the 2 bolts.

Install the multi-function switch to the steering column shaft by pushing it until it reashes the marked portion.

Install the SRS clock spring and multi-function switch connector.

After installing the upper/lower column shroud, tighten the 3 bolts.

Fix the steering wheel with a lock nut.

Fix the SRS module to the steering wheel with 3 bolts.

Connect the (-) negative battery cable.