1.
Place the steering columshaft in position and install the 4 mounting bolts temporarily.
Place the steering columshaft in position and install the 4 mounting bolts temporarily.
Install the bolt on the universal joint and gear box connecting part in the driver's side brake pedal lower portion.
Completely tighten the temporarily installed 4 mounting bolt on the steering column shaft.
After installing the lower crash pad, tighten the 2 bolts.
Install the multi-function switch to the steering column shaft by pushing it until it reashes the marked portion.
Install the SRS clock spring and multi-function switch connector.
When installing the clock spring, refer the RT group to prevent the damage of clock spring inner cable.
After installing the upper/lower column shroud, tighten the 3 bolts.
Fix the steering wheel with a lock nut.
Fix the SRS module to the steering wheel with 3 bolts.
Connect the (-) negative battery cable.
