1.
Support the specified point of the vehicle with a lift.
Support the specified point of the vehicle with a lift.
Remove the front tires (RH/LH).
After removing the split pin, disconnect the tie rod from the knuckle by using the speicial tool.
Disconnect the shaft assembly from the gear box inside the passenger compartment.
Keep the neutral-range to prevent the damage of the clock spring inner cable when you handlethe steering wheel.
Disconnect the front muffler assembly.
Raise up the vehicle.
Disconnect the transaxle rear mounting bracket.
After supporting the crossmember with a transaxle jack, remove the 4 bolts fixing the crossmember.
Remove the manual steering gear box mounting bolt and clamp.
Separate the manual steering gear box assembly by pulling it toward the right side of the vehicle.
