3.
Is the Key teaching completed ?
YES
a.
Go to "Verification of Vehicle Repair" procedure.
NO
a.
Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM and then go to " Verification of Vehicle repair" procedure.
caution
1. Don’t forget to prepare for the PIN of the vehicle before removing PCM from the vehicle.
2. Remember that substituting with a known-good PCM should be followed "The things to remember before repair(1)" in "System Inspection" procedure. (In case of faulty PCM, it has to be replaced with "VIRGIN" or " NEUTRAL" PCM.)
3. Strongly recommend to register PIN which is given by HMC or the regional office when replacing a new PCM.
