5.
Verify that voltage of SHIFT SOLENOID A change 0V into 12V.
IG KEY : ON , Engine : ON
Lift a vehicle.
Measure voltage between SHIFT SOLENOID C04 Terminal 2 and GND with MULTIMETER or OSCILLOSCOPE.
Select D RANGE from N RANGE
Verify that voltage of SHIFT SOLENOID A change 0V into 12V.
Is that displayed near the specified value?
YES
Go to “Terminal and Connector Inspection” of the W/Harness Inspection procedure
NO
Go to Power Inspection of W/Harness Inspection in Inspection & Repair procedure
