IG KEY : ON, Engine: ON

Lift a vehicle.

Measure voltage between SHIFT SOLENOID C04 Terminal 2 and GND with MULTIMETER or OSCILLOSCOPE

Select D RANGE from N RANGE

Verify that voltage of SHIFT SOLENOID A change 0V into 12V.

caution

<Scantool normal data>

- Start a vehicle, Verify terminated diagnosis of parts ,which is fixed properly

- Remove all trouble code and then check for trouble code again

- In occuring trouble, try cranking more than 2 times and then verify alarm light.

Monitoring for (pending) DTC. Is DTC P0750 set?

YES

NO

IG KEY : ON, Engine: ON

Lift a vehicle.

Measure voltage between SHIFT SOLENOID C04 Terminal 2 and GND with MULTIMETER or OSCILLOSCOPE

Select D RANGE from N RANGE

Verify that voltage of SHIFT SOLENOID A change 0V into 12V.

caution

<Scantool normal data>

- Start a vehicle, Verify terminated diagnosis of parts ,which is fixed properly

- Remove all trouble code and then check for trouble code again

- In occuring trouble, try cranking more than 2 times and then verify alarm light.

Monitoring for (pending) DTC. Is DTC P0750 set?

YES

NO