IG KEY : ON, Engine : ON

Connect Scantool,select Service Data procedure.

Select Engine RPM, Input speed,Output speed , TRANSAXLE RANGE. Do graphic mode.

Stall test procedure in D2 or D3.

Compare with under the data

caution

<Scantool normal data>

- Start a vehicle ,Verify terminated diagnosis of parts ,which is fixed properly.

- Remove all displayed DTC and then check for trouble code again

- In occuring trouble , try cranking more than 2 times and then verify alarm light.

Monitoring for (pending) DTC. Is DTC P0734 set?

YES

NO