5.
Compare with under the normal data.
caution
<Scantool normal data>
IG KEY : ON , Engine : OFF
Connect the Scantool,select the service data.
Select TRANSAXLE RANGE SWITCH and Graphic Mode.
Select LEVER in sequence of P,R,N,D,2,L
Compare with under the normal data.
<Scantool normal data>
Is TRANSAXLE RANGE SWITCH displayed near the specified value?
YES
Go to "Terminal and Connector Inspection" of the W/Harness Inspection procedure
NO
Go to W/Harness Inspection of Inspection & Repair procedure.
