5.
Compare with under the normal data.
caution
<Scantool normal data>
- Start a vehicle ,Verify terminated diagnosis of parts ,which is fixed properly.
- Remove all trouble code and then check for trouble code again
IG KEY : ON , Engine : OFF
Connect the Scantool,select the service data.
Select TRANSAXLE RANGE SWITCH and Graphic Mode.
Select LEVER in sequence of P,R,N,D,2,L
Compare with under the normal data.
<Scantool normal data>
- Start a vehicle ,Verify terminated diagnosis of parts ,which is fixed properly.
- Remove all trouble code and then check for trouble code again
Monitoring for (pending) DTC. Is DTC P0707 set?
YES
Go to the applicable troubleshooting procedure.
NO
System OK
