1.
When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.
Tightening torque
Accelerator arm bracket bolts :
8 ~ 12 Nm (80 ~ 120 kg·cm, 5.8 ~ 7.2 lb·ft)
Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.
Apply multipurpose grease around the cable end.
