Support the specified portion of the vehicle with a lift.

Insert the color tube from the front pump upper part to the lower part and install 2 mounting bolts.

Place the return tube and hose in position fix the clamp with a bolt and install the reservoir tank. (When installing the return tube and hose)

Connect the color tube to the power steering oil reservoir tank side hose, return tube and hose side and fix it with clips. (When installing the color tube)

Place the pressure hose and tube assembly in position and connect it to the oil pump. (When installing the pressure hose and tube)

Raise the vehicle with a lift.

Fix the pressure tube and return tube fitting to the power steering gear box.

Support the crossmember assembly with a transaxle jack and tighten 4 mounting bolts on the crossmember.

Fix the power steering pressure tube and return tube mounting clamp with a bolt.

Fix the transaxle rear mounting bracket to the crossmember.

Fix the front muffler assembly to the engine side.

Lower the vehicle.

Connect the gear box and steering column shaft universal joint in the passenger compartment.

Tighten 2 mounting bolt on the front bumper upper part. (When installing the tube)

Connect the tie rod end to the LH/RH knuckles.

Install the tires (LH/RH).

Fill the power steering oil reservoir with fluid.