5.
Verify that voltage of SHIFT SOLENOID C change 0V into 12V.
IG KEY : ON, Engine : ON
Lift a vehicle.
Measure voltage between SHIFT SOLENOID C04 Terminal 6 and GND with MULTIMETER or OSCILLOSCOPE.
Speed up and shift more than 3rd gear position in D RANGE
Verify that voltage of SHIFT SOLENOID C change 0V into 12V.
Is that displayed near the specified value?
YES
Go to “Terminal and Connector Inspection” of the W/Harness Inspection procedure
NO
Go to Power Inspection of W/Harness Inspection in Inspection & Repair procedure
