1.
Confirm that the pad is fully bonded to the fuel tank, and install the fuel tank by tightening the self-locking nuts.
Confirm that the pad is fully bonded to the fuel tank, and install the fuel tank by tightening the self-locking nuts.
Connect the leveling hose to the tank and at the filler neck by approximately 40mm (1.6 in.).
When connecting the filler hose, the end with the shorter straight pipe should be connected to the tank side.
Connect the vapor hose. When attaching the vapor hose to the line, be sure that the hose is attached as shown in the illustration.
Connect the high pressure hose to the fuel pump. Be careful that the fuel hose does not twist.
Connect the electrical fuel pump connector.
