2.
Using the Special Tools (J38402, A-20), compress the coil spring until there is only a little tension on the strut.
note
Do not use an impact gun.
Remove the dust cover with a flat-tip screw driver.
Using the Special Tools (J38402, A-20), compress the coil spring until there is only a little tension on the strut.
Do not use an impact gun.
Remove the nut at the top end of the shock absorber.
Remove the insulator, spring seat, coil spring, dust cover from the strut assembly.
Fully extend the shock absorber rod.
Drill a hole on the A section to remove gas from the cylinder.
The gas coming out is harmless, but be careful of chips that may fly when drilling.
