REPLACEMENT
BALL JOINT AND DUST COVER
1.

Using a flat-tipped screwdriver, remove the dust cover from the lower arm ball joint.

2.

Remove the snap ring.

3.

Using a plastic hammer, tap the ball joint out of the lower arm.

4.

Using the Special Tools (09545-11000 A/B), press-fit the ball joint into the lower arm assembly.

5.

Using the special tools (09545-1C000 A/B) install the snap ring.

6.

Using the Special Tool (09545-11000 A/B), install the dust cover.

note

Apply Recommended grease to the dust cover inner side and stud.

Recommended grease :

Variant R-2 grease or poly lub gly 801K

Яндекс.Метрика