INSPECTION
FRONT DOOR LOCK ACTUATOR INSPECTION
1.

Remove the front door trim panel. (Refer to BD group-Front door)

2.

Disconnect the 6P connector from the actuator.

3.

Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

REAR DOOR LOCK ACTUATOR INSPECTION
1.

Remove the rear door trim panel. (Refer to BD group-Rear door)

2.

Disconnect the 6P connector from the actuator.

3.

Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

FRONT DOOR LOCK SWITCH INSPECTION
1.

Remove the front door trim panel. (Refer to BD group-Front door)

2.

Disconnect the 6P connector from the actuator.

3.

Check for continuity between the terminals in each switch position according to the table.

REAR DOOR LOCK SWITCH INSPECTION
1.

Remove the rear door trim panel. (Refer to BD group-Rear door)

2.

Disconnect the 6P connector from the actuator.

3.

Check for continuity between the terminals in each switch position according to the table.

Яндекс.Метрика