Push in the power steering gear box assembly in the right side of the vehicle.

Fix the power steering gear box to the crossmember.

Install the pressure tube and return tube fitting to the power steering gear box.

After raising the crossmember assembly with a transaxle jack, install the crossmember to the body.

Fix the power steering pressure hose and return tube mounting clamp with the bolt.

Fix the transaxle rear mounting clamp.

Fix the front muffler assembly.

Slowly lower the vehicle.

Connect the tie rod to the knuckles (RH/LH)

Install the tires (RH/LH)

Connect the steering shaft to the driver side gear box.

Apply the power steering fluid.

Bleed the air.