2.
Remove the transaxle assembly, after removing each bolt which connects the transaxle assembly and engine (Refer to "MT" Gr).
To remove the transaxle assembly, first drain the clutch fluid and transaxle gear oil, then remove the air cleaner joint and the mounting bracket etc.
Remove the transaxle assembly, after removing each bolt which connects the transaxle assembly and engine (Refer to "MT" Gr).
Insert the special tool (09411-25000) in the clutch disc to prevent the disc from shifting.
Loosen the bolts which attach the clutch cover to the flywheel in a star pattern. Loosen the bolts in succession, one or two turns at a time, to avoid bending the cover.
Do not clean the clutch disc or the release bearing with cleaning solvent.
