1.
PCSV Check
(1)
Key "OFF".
(2)
Disconnect PCSV harness connector.
(3)
Measure the resistance between terminal 1 and 2 of PCSV harness connector.(Component side)
a.
Specification :
Item | Specification |
PCSV Coil Resistance(Ω) | 26 Ω at 20 ℃(68℉) |
(4)
Is the measured resistance within specification ?
YES
a.
Substitute with a known-good ECM and check for proper operation. If the problem is corrected, replace ECM and then go to "Verification of Vehicle Repair" procedure.
NO
a.
Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "Verification of Vehicle Repair" procedure.
