2.
Apply rubber grease on the piston seal and install the piston seal in the cylinder.
Clean all components except the pads and shims with isopropyl alcohol.
Apply rubber grease on the piston seal and install the piston seal in the cylinder.
Assemble the piston and piston boots according to the following procedure.
Apply rubber grease to the caliper bore, the outside surface of the piston and the piston boot.
Install the piston boot on the piston as illustrated.
Insert the piston boot in the inner groove of the caliper and push the piston into the caliper.
Assemble the sliding parts according to the following procedure.
Apply rubber grease to the outside surface of the sleeve and pin, pin and sleeve bore of the caliper, pin boot and sleeve boot.
Insert the boot into the groove of the caliper.
Install the pads.
Be careful so that the disc or pad is not contaminated by grease.
