1.
Check for resistance between No.4 and No.5 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
VOLUME DOWN | 4 - 5 | 6.81 kΩ |
VOLUME UP | 4 - 5 | 4.61 kΩ |
SEEK UP | 4 - 5 | 430 Ω |
SEEK DOWN | 4 - 5 | 1.11 kΩ |
MODE | 4 - 5 | 2.11kΩ |
Check for resistance between No.4 and No.5 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
VOLUME DOWN | 4 - 5 | 6.81 kΩ |
VOLUME UP | 4 - 5 | 4.61 kΩ |
SEEK UP | 4 - 5 | 430 Ω |
SEEK DOWN | 4 - 5 | 1.11 kΩ |
MODE | 4 - 5 | 2.11kΩ |
Disconnect the negative (-) battery terminal.
Remove the driver airbag module. & steering wheel (A). (Refer to the airbag group)
Remove the steering wheel lower cover (B) after loosening the screw.
Remove the audio remote control switch connector after remove the steering wheel remote control switch and 2 screws.
Installation is the reverse of removal.
