Transaxle type | M5CF2 | |
Engine type | U1.5 Diesel | |
Gear ratio | 1st | 3.615 |
2nd | 1.962 | |
3rd | 1.257 | |
4th | 0.905 | |
5th | 0.702 | |
Reverse | 3.583 | |
Final gear ratio | 3.471 | |
Items | Standard value [in(mm)] |
Input shaft rear bearing end play | 0.00-0.0019L(0.00-0.05L) |
Output shaft bearing end play (At 70kgf load) | 0.0019T-0.0039T(0.05T-0.10T) |
Input shaft front bearing end play | 0.00-0.0019L(0.00-0.05L) |
Differential bearing end play (At 70kgf load) | 0.0059T-0.0078T(0.15T-0.20T) |
Differential pinion backlash | 0.001L-0.006L(0.025L-0.150L) |
T: Indicate tightening of -(minus) direction of end play
L: Indicate loosening of +(plus) direction of end play
Standard value | Nm | kgf.cm | lb-ft |
Release cylinder tube nut | 13-17 | 130-170 | 9-12 |
Release cylinder tube bracket | 15-22 | 150-220 | 10-16 |
Release cylinder bolt | 15-22 | 150-220 | 10-16 |
Control shift complete bolt | 30-35 | 300-350 | 21-25 |
Oil drain plug | 60-80 | 600-800 | 43-58 |
Oil filler plug | 60-80 | 600-800 | 43-58 |
Poppet ball | 30-35 | 300-350 | 21-25 |
Clutch housing to transmission case | 43-55 | 430-550 | 32-40 |
Speedometer driven gear | 3-5 | 30-50 | 2-4 |
Reverse idler bolt | 43-55 | 430-550 | 32-40 |
Reverse shift lever assembly bolt | 15-22 | 150-220 | 10-16 |
Input shaft bearing retainer | 15-22 | 150-220 | 10-16 |
Rear roll support bracket bolt | 45-64 | 450-640 | 32-46 |
Rear roll stopper insulator bolt and nut | 45-64 | 450-640 | 32-46 |
Transaxle mounting bracket bolts | 60-80 | 600-800 | 43-58 |
Differential drive gear seal bolt | 130-140 | 1300-1400 | 94-101 |
Clutch release lever fulcrum bolt | 55-60 | 550-600 | 40-43 |
Transaxle upper mounting bolt(TM→ENG.) | 60-80 | 600-800 | 43-58 |
Transaxle lower mounting bolt(ENG.→TM) | 43-55 | 430-550 | 32-40 |
Always follow torque tightening levels. Failure to follow such levels can result in parts breaking if over-tightened or loosening if under-tightened. In either case, serious personal injury or death could result to vehicle occupants.
Items | Recommnend lubricant | Quantity |
Transaxle gear oil | SAE 75W/85 API GL-4 TGO-7(MS517-14) ZIC G-F TOP 75W/85 HD GEAR OIL XLS 75W/85 | 2.0L(2.1US qt, 1.76lmp qt) |
Air bleeder | MS721-38 | As requried |
Transaxle housing | MS721-40 or MS721-38 | As requried |
Surface of release fork and bearing | Grease (CASMOLY L9508) | As requried |
