3.
Installation is the reverse of removal.
caution
When removing and installing the hood, an assistant is necessary.
Disconnect the wind shield washer nozzle connecting tube and clip.
After loosening the hood hinge mounting bolts(4EA), remove the hood.
Installation is the reverse of removal.
When removing and installing the hood, an assistant is necessary.
After removing the hood latch cover mounting screws(2EA), remove the hood latch cover.
Remove the hood latch mounting bolts(3EA).
TORQUE : 7 ~ 11 Nm (70 ~ 110 kg·cm, 5 ~ 8 lb·ft)
After disconnecting the hood latch and the hood latch cable, remove the hood latch.
Installation is the reverse of removal.
After loosening the hood hinge mounting bolt, adjust the hood by moving it up or down, or right or left.
Adjust the hood height by turning the hood over slam bumper.
Loosen the hood latch mounting bolt lightly.
Adjust the hood latch by moving it up or down, or right or left.
