2.
After loosening the mounting screw, remove the cluster facia panel using a screwdriver.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Lower the steering column.
After loosening the mounting screw, remove the cluster facia panel using a screwdriver.
After loosening the cluster mounting screws(4EA), take out the cluster from the housing.
Disconnect the cluster connector and remove the cluster.
Installation is the reverse of removal.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Take care not to scratch the crash pad.
Raise the steering column.
Remove the door scuff trim and cowl side trim. ("See page BD-52")
Remove the fuse box cover.
Loosen the 2 mounting bolts and 2 screws. Disconnect the self-diagnosis connector and hood release cable and remove the crash pad lower panel.
Installation is the reverse of removal.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Take care not to scratch the crash pad.
Remove the glove box stopper.
After loosening the glove box mounting screws(4EA), remove the glove box.
Installation is the reverse of removal.
After removing the driver's side mounting screw, remove the panel.
Installation is the reverse of removal.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Take care not to scratch the crash pad.
Remove the glove box. ("See Page BD-46")
Remove the crash pad lower panel. ("See Page BD-45")
Disconnect the intake control mode, mode control, and air mix control cable. Remove the center facia panel from the lower portion with a trim remover.
Disconnect the switch connectors and remove the center facia panel.
Installation is the reverse of removal.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Take care not to scratch the crash pad.
Remove the glove box. ("See Page BD-46")
Remove the crash pad lower panel. ("See Page BD-45")
Remove the center facia panel. ("See Page BD-47")
Loosen the audio assembly mounting screws(4EA).
After disconnecting the connector, remove the audio assembly.
Installation is the reverse of removal.
When using a screwdriver or equivalent, wrap it with protective tape to prevent damage.
Wear gloves to protect hands from injury.
Take care not to scratch the crash pad.
Remove the steering wheel and airbag module.
Remove the crash pad center lower panel. ("See Page BD-46")
Remove the glove box. ("See Page BD-46")
Remove the crash pad lower panel. ("See Page BD-45")
Remove the center facia panel.("See Page BD-47")
Remove the audio assembly.
Remove the crash pad side trim.
Disconnect the antenna connecting connector.
After loosening the main crash pad mounting bolts(9EA), remove the main crash.
Installation is the reverse of removal.
