1.
Clean the gasket surfaces of the coolant pump body and the cylinder block.
Clean the gasket surfaces of the coolant pump body and the cylinder block.
Install a new coolant pump gasket to the coolant pump and tighten the bolts to the specified torque.
Tightening torque
Coolant pump bolt to cylinder block :
1.3 L : 12 ~ 15 Nm (120 ~ 150 kg.cm, 9 ~ 11 lb.ft)
1.1 L : 8 ~ 10 Nm (80 ~ 100 kg.cm, 6 ~ 7 lb.ft)
Install the timing belt idler and timing belt. Adjust the timing belt tension. Refer to the "Timing System" section.
Install the timing belt covers.
Install the coolant pump pulley and drive belt, and then adjust the belt tension.
Refill the system with clean coolant.
Run the engine and check for leaks.
