1.
Install the high pressure pump assembly and screw the three high pressure mounting bolts(D).
Tightening Torque: 14.7 ~ 19.6 N·m (10.9 ~ 14.5 lbf·ft)
Install the high pressure pump assembly and screw the three high pressure mounting bolts(D).
Tightening Torque: 14.7 ~ 19.6 N·m (10.9 ~ 14.5 lbf·ft)
Install the drive belt.(Refer to "EM" group.)
Screw the timing chain cover plug(G) after fastening the high pressure pump sprocket nut(F).
Don't reuse the O-ring of the timing chain cover plug.
Connect the return hose(B) and the hose(C) connecting to the fuel filter.
Connect the high pressure pipe(A) connecting high pressure pump and common rail.
Connect the negative battery(-) terminal.
Start the engine and check for leakage on fuel line connected to the high pressure pump.
