5.
Remove the mounting nuts from the crash pad. Then remove the passenger airbag.
caution
The removed airbag module should be stored in a clean, dry place with the airbag cushon up.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the glove box. (Refer to BD group)
Disconnect the PAB connector and remove the PAB mounting bolts. (Refer to BD group)
Remove the crash pad. (Refer to BD group)
Replace the crash pad which is damaged while PAB is deployed.
Remove the mounting nuts from the crash pad. Then remove the passenger airbag.
The removed airbag module should be stored in a clean, dry place with the airbag cushon up.
