Item | Specification |
Steering gear type Rack stroke Power steering pump type Oil pump displacement | Rack and pinion 132mm Vane type 9.6cm³/rev. MAX. (0.59 in³/rev. MAX.) |
Item | Specification |
Steering wheel free play | 0~30 mm (0~1.1 in.) |
Steering angle (Unladen state) | |
- Inner wheel | 37°42´ ± 1°30´ |
- Outer wheel | 33°03´ |
Stationary steering effort | 29N (3.0 kg, 6.5 lbs) |
Belt deflection | 6~9 |
Oil pump relief pressure | 6.3~7.06 MPa (65~72 kg/cm², 924~1024 psi) |
Total pinion preload | 0.6~1.3 Nm (6~13 kg·cm, 5.2~11.3 lb·in.) |
Tie rod swing resistance | 2~5 Nm (20~50 kg·cm, 1.4~3.6 lb·ft) |
Tie rod end ball joint starting torque | 0.5~2.5 Nm (5~25 kg·cm, 0.36~1.78 lb·ft) |
Item | Nm | kg·cm | lb·ft |
Power steering column and shaft | |||
Steering column and shaft assembly | 13~18 | 130~180 | 9.6~13.3 |
Power steering wheel lock nut | 35~45 | 350~450 | 25.8~33.2 |
Pinion gear and joint assembly | 13~18 | 130~180 | 9.6~13.3 |
Steering column shaft and universal joint assembly | 30~35 | 300~350 | 22~25.8 |
Dust cover mounting bolt | 17~26 | 170~260 | 12.5~19.2 |
Power steering gear box | |||
Gear box mounting bolt | 60~80 | 600~800 | 44~59 |
Gear box mounting bracket and crossmember mounting bolt | 90~110 | 900~1100 | 67~81 |
Tie rod end lock nut | 50~55 | 500~550 | 37~40.6 |
Tie rod end ball joint and knuckle arm mounting nut | 24~34 | 160~340 | 11.8~25 |
Feed tube to gear box | 10~16 | 100~160 | 7.4~11.8 |
Gear box to valve body | 16.7~25.5 | 167~255 | 12.3~18.9 |
Yoke plug lock nut | 49~68.6 | 490~686 | 36.1~50.6 |
Power steering oil pump | |||
Pressure hose to oil pump | 55~65 | 550~650 | 40.6~47.9 |
Oil pump adjusting bolt | |||
- 1.3 SOHC | 25~30 | 250~300 | 18.5~22.1 |
- 1.5 DOHC | 35~50 | 350~500 | 25.8~37 |
Oil pump mounting bolt | |||
- 1.3 SOHC | 20~27 | 200~270 | 14.8~20.0 |
- 1.5 DOHC | 35~35 | 350~500 | 25.8~37 |
Oil pump bracket mounting bolt | |||
- 1.3 SOHC | 20~27 | 200~270 | 14.8~20.0 |
- 1.5 DOHC | 35~50 | 350~500 | 25.8~37 |
Power steering hose | |||
Power steering reservoir mounting bolt | 4~6 | 40~60 | 3.0~4.0 |
Power steering hose mounting bolt | 4~6 | 40~60 | 3.0~4.0 |
Power steering tube mounting bolt | 4~6 | 40~60 | 3.0~4.0 |
Recommended lubricant | Quantity | |
Horn contact ring of steering wheel | CENTOPLX278 (KLUBER KOREA) | 1.5g |
Bearing of steering shaft | ALVANIA #2 or #3 (KEUK DONG SHELL, KOREA) | As required |
Ball joint of tie rod end | SHOWA SUNLIGHT MB-2 or equivalent | As required |
Steering gear housing | ONE-LUBER RP GREASE (KYODOYUSHI, JAPAN) | As required |
Inner ball joint of gear box | LONG TIME PD2 (OPTIMOL, GERMAN) | As required |
Contact area of gear box bellows & tie rod | SILICON GREASE (SPEC NO. : MS511-41) | As required |
Power steering fluid | PSF-3 | 0.75~0.8 liter (0.79~0.84 qts.) |
