1.
Apply multipurpose grease to the spline of the disc.
Grease: CASMOLY L 9508
caution
When installing the clutch, apply grease to each part, but be careful not to apply excessive grease.
It can cause clutch slippage and vibration (shudder).
Apply multipurpose grease to the spline of the disc.
Grease: CASMOLY L 9508
When installing the clutch, apply grease to each part, but be careful not to apply excessive grease.
It can cause clutch slippage and vibration (shudder).
Install the clutch disc assembly to the flywheel using the special tool (09411-25000).
Install the clutch cover assembly to the flywheel and temporarily tighten the bolts one or two steps at a time in a star pattern.
TORQUE
Clutch cover bolt :
12 ~ 15 Nm (120 ~ 150 kgf.cm, 9 ~ 11 lb.ft)
Remove the special tool(09411-25000) from the clutch disc assembly.
Tighten each bolt to connect the transaxle assembly and engine.
Install the transaxle assembly to the engine and drain the clutch fluid and transaxle gear oil.
Bleed the clutch system.
