1.
Install the master cylinder (A).
TORQUE :
9-14 Nm (90-140 kgf.cm, 7-10 Ib-ft)
Install the master cylinder (A).
TORQUE :
9-14 Nm (90-140 kgf.cm, 7-10 Ib-ft)
Connect the flexible hose(A) of the brake reserve tank to the master cylinder.
Install the push rod(A) to the clutch pedal.
Apply the specified grease to the clevis pin and washer.
Wheel bearing grease: SAE J310, NLGI NO. 2
Pour the clutch fluid into the clutch master cylinder.
Connect the clutch tube(A) to the master cylinder.
TORQUE :
13-17 Nm (130-170 kgf.cm, 10-13 Ib-ft)
Bleed the clutch system.
