After loosening the door hinge mounting bolt lightly, adjust the door by moving it up or down, or left or right.

After loosening the door striker mounting screw lightly, adjust the striker by moving it up or down, or left or right.

Remove the door trim and door trim seal.("See Page BD-22")

Raise the glass.

Loosen the regulator mounting nuts lightly.

Push the glass rearward (front door glass) or forward (rear door glass), then tighten the mounting nut.

Lower the glass.

Loosen the rear channel mounting nuts.

Push the rear channel against the glass, then tighten the mounting nuts.

Check that the glass moves smoothly.