INSPECTION
1.

Measure the inside diameter of the brake drum.

Check the runout of the brake drum by using a dial indicator.

Inside diameter mm (in.)

Standard value :

180(7)-without ABS, 203.2(8)-with ABS

Service limit :

182(7.165)-without ABS, 205.2(8.079)-with ABS

Out-of-round (brake drum) mm (in.)

Service limit : 0.05 (0.002)

2.

Measure the brake shoe lining thickness.

Lining thickness mm (in.)

Standard value : 5.14 (0.202)

Service limit : 1 (0.0394)

3.

Inspect the brake lining and drum for proper contact.

4.

Inspect the wheel cylinder outside for excessive wear and damage.

5.

Inspect the backing plate for wear or damage.

Яндекс.Метрика