1.
Apply the specified grease to the locations indicated in the illustration and to each component.
A.
Shoe and backing plate contact surfaces.
B.
Shoe and anchor plate contact surfaces.
Recommended grease :
Multipurpose grease SAE J310, NLGI No.2
Apply the specified grease to the locations indicated in the illustration and to each component.
Shoe and backing plate contact surfaces.
Shoe and anchor plate contact surfaces.
Recommended grease :
Multipurpose grease SAE J310, NLGI No.2
Connect the operating lever to the parking cable.
Install the shoe hold-down pin.
Install the shoe adjuster and assemble the return spring.
Assemble the adjuster lever and adjuster spring.
Assemble the drum and pull the parking brake lever to full stroke several times.
Be sure that the inside surface of drum is not contaminated by grease or other materials.
Be sure the maximum outer diameter of shoe is within the specifications and install the drum.
Without ABS (7"drum) Ø179.5~179mm (7.07~7.05 in.)
With ABS (8"drum) Ø202.2~201.7mm (7.96~7.94 in.)
Adjust the shoe clearance by depressing the brake pedal more than 20 times with a force of 10 kgf.
