2.
Remove the air duct (2 Bolts).
Discharge the refrigerant and coolant and disconnect the radiator upper hose.
Remove the air duct (2 Bolts).
After removing the radiator reservoir, remove the 4 radiator support bolts.
Tighten torque : 4~6Nm (40~60kg.㎝ , 2.9~4.4Ib.ft)
Remove the cooling module connector.
Remove the cooling module (condenser).
Remove the liquid tube nut.
Remove the condenser mounting bolts (2).
Tightening torque : 8~12Nm (80~120kg.㎝ , 5.9~8.8Ib.ft)
Remove the condenser upward by pressing the radiator backward the vehicle.
