4.
Are any DTCs recorded ?
YES
a.
Go to the DTC guide of recorded No. in scantool.
NO
a.
System operates within specification.
After a repair, it is essential to verify that the fault is corrected.
After connecting scantool select "Diagnostic Trouble Codes(DTCs)" mode to and then clear DTC.
Drive the vehicle within DTC Enable conditions in General information.
After selecting "Diagnostic Trouble Codes(DTCs)" mode and check DTC is recorded again.
Are any DTCs recorded ?
YES
Go to the DTC guide of recorded No. in scantool.
NO
System operates within specification.
