5.
Disconnect the tie rod end ball joint from the knuckle by using the Special Tool (09568-34000).
note
Be sure to tie the special tool(09568-34000) to the near part with cord not to fall.
Remove the front wheel and the tire.
Remove the split pin and driveshaft nut from the front hub.
Remove the front brake assembly from the knuckle and suspend it with a wire.
Remove the vehicle speed sensor from the knuckle.
Disconnect the tie rod end ball joint from the knuckle by using the Special Tool (09568-34000).
Be sure to tie the special tool(09568-34000) to the near part with cord not to fall.
Disconnect the lower arm ball joint from the knuckle by using the Special Tool (09568-34000).
Disconnect the driveshaft from the hub.
Disconnect the strut assembly from the knuckle.
Remove the hub and knuckle as an assembly.
